Putting together an active surround system? Look no further than the Reveal 66D as the ideal center channel monitor. With its extended WideBand response, the R66D preserves the harmonic structure of recorded music and vocals, which results in a more natural and accurate reproduction of the original source. Ready to integrate with your analog or digital production environment, the R66D includes Tannoy's Activ-Assist equalization technology.<BR><BR><strong>Main Features<BR><BR>From the front:</strong><br> • 40mm MDF sculpted baffle stiff, heavy and rigid and minimizes diffraction.<br> • Recessed drive units flush with the baffle surface minimizes diffraction.<br> • New tweeter has wide band design extending the amplitude response beyond 20kHz audibility to 50kHz to correct the phase response from 8kHz to 20kHz within the audible band. This preserves the harmonic structure of sounds and the stability of the stereo image.<br> • Smooth tweeter faceplate contours prevent diffraction and cavity effects.<br> • 10 point fixing maximizes contact between drive unit and baffle.<br> • New design bass units have aluminum flux control rings around the voice coils and copper caps on the pole pieces linearises the voice coil motional impedance to reduce non linear (3rd order) distortion products caused by varying voice coil inductance.<br> • Bass unit development using Klippell analysis equipment to minimize offsets and linearise the suspension components.<br> • On/Mute (energy saving mode) via the Tannoy logo push switch.<br> • LED indicator shows Active/Energy Saving modes.<BR><BR><strong>From the side:</strong><br> • 18mm MDF cabinet construction provides stiffness and minimizes coloration.<br> • Internal construction braces the sides and rear of the cabinet against the rear of the bass driver to provide a rigid reactive mass for the moving cone assembly. Ensures fast tight bass response and clear midrange.<br> • Front baffle and rear panel tongued and grooved into the cabinet as a mechanical interlock for safety if wall mounted.<BR><BR><strong>From the rear:</strong><br> • Double insulated to prevent ground loops no safety earth required.<br> • CSA/CE/CCC/CB full safety approvals including China.<br> • Spare fuse in IEC mains connector.<br> • On/Off mains isolator switch.<br> • Substantial heat sinking for long term cool running and 24/7 reliability.<br> • XLR and 1/4" jack Combi connector for balanced input.<br> • Switch adjacent to XLR selects digital or analogue input.<br> • RCA input for S/PDIF with 75 Ohm terminating impedance.<br> • 2nd RCA for S/PDIF output for slaving a stereo pair.<br> • Yellow LED indicator lights up when digital lock is achieved.<br> • 3-way switch selects which channel of the S/PDIF stream is decoded, marked Left/Right/Mono. Switching is post 2 channel DAC.<br> • Trim/Gain control over +6dB/-12dB range reference
|
