ezFolk Home MP3 Section Tabs & Tutorials Forums - Newest Messages Musical Instruments Books, CDs, & DVDs Other Stuff
ezFolk Forums Home 
Home Search search Menu menu Not logged in - Login | Register

 Moderated by: Tony Provencher, Richard Hefner
New Topic Reply Printer Friendly
Bending a note?  Rate Topic 
AuthorPost
 Posted: Thu Sep 17th, 2009 03:05 am
  PM Quote Reply
1st Post
gardner321
Approved
 

Joined: Wed Oct 10th, 2007
Location:  
Posts: 60
Instrument Interest: Ukulele
Status: 
Offline
What does bending a note mean and how is it done.
Also the Horner inst book teaches to widen the lip opening to cover three hole for a chord and narrow the lips to blow one opening for a note. There is no mention of using the tongue to cover the holes. Another web site speaks of using the tongue. Confused

Back To Top PM Quote Reply  

 Posted: Thu Sep 17th, 2009 07:58 am
  PM Quote Reply
2nd Post
theBlackman
Approved


Joined: Mon Jun 27th, 2005
Location: Lake Forest, California USA
Posts: 783
Instrument Interest: Guitar, Autoharp, Other
Status: 
Offline
The term in general means raising or lowering the pitch.  As a Uke player if you play a fretted note and use the fretting finger to pull the note down or up in the fret space, the note will change pitch.   That is a "BEND".

As for Harmonicas you can do either.  It depends on how you learn.  If it is easier for you to "tongue" to cover the hole(s) you don't want, then do so.  If you find it easier to purse your lips to play a single note do so.

Some combination of both is usually used.  You purse your lips to reduce the number of "Holes" that are in play (usually two) and use your tongue to cover the one you want.

You can trill a series of two notes this way.  Note A is played with note B blocked by the tongue, and then the tongue is slid to cover the other.  If done rapidly, you get ABABABABABABABABA.  A&B is not the name of a note.  It is just a way to identify two notes.

Bending a note on a stringed instrument is easy.  On a harmonica it's a little more difficult.  Horns lend themselves to the technique as do some reeds.

You have heard a "Bend" in most of the blues guitar pieces you have heard.



____________________
Let each day start as a blank page for life to write upon.
http://ezfolk.com/audio/dusty
http://cdbaby.com/all/theblackman
http://youtube.com/DustinFLeer
Back To Top PM Quote Reply

 Posted: Thu Sep 17th, 2009 03:35 pm
  PM Quote Reply
3rd Post
Jim Yates
Approved


Joined: Wed Nov 19th, 2008
Location: Port Hope, Ontario Canada
Posts: 247
Instrument Interest: Ukulele, Clawhammer Banjo, Guitar, Harmonica, Dulcimer, Mandolin, Autoharp
Status: 
Offline
There are a few ways to bend a note on a mouth harp. Most bending done on the draw notes. I recently heard it described as doing with your mouth what you'd do if you were whistling on the inhale. Some folks tip the harp downward and others drop their jaw. Bending can be done on the high blow notes as well.
Sorry, but bending is a lot easier to do than to describe



____________________
Jim
http://www.myspace.com/jimyates
http://www.myspace.com/mapleleafchampionjugband
Back To Top PM Quote Reply  

Current time is 09:16 pm  
ezFolk Forums > Other Instruments > Harmonica > Bending a note? Top




UltraBB 1.17 Copyright © 2007-2008 Data 1 Systems
Page processed in 0.3847 seconds (11% database + 89% PHP). 23 queries executed.